ANAND EXPELLER COMPANY

SEED PREPARATORY SECTION

Seed Processing is the first and most vital step of the oil extraction process at Oil Mills or Oil Plants. This is the part where the seeds are procured, cleaned, flaked, and cooked so that the oil extraction process can be carried out in a more efficient manner. Almost all kinds of seeds have some amount of oil content in them.

Seed processing or Seed treatment is important so that the final output or the extracted oil is of the highest quality. Naturally, seeds come with husks, hulls, and sometimes even dust and unwanted particles like stones, metal, glass, etc. This hampers the oil extraction process and the extracted oil contains many impurities. Through seed treatment or processing, all the unwanted and impure materials are separated from the seeds. During the earlier times, traditional methods were used to clean the seeds from materials like stones, hull, husks, and dust. These methods were neither effective nor they provided accurate results.

Anand Oil Mill Plants with latest technology, manufacture and supply many seed processing machines which are used for processing different types of oilseeds. These machines are fabricated and constructed to give them utmost strength and sturdiness. These are used to clean, flake and cook all types of seeds such as Sunflower seeds, Castor seeds, Mustard seeds, Groundnuts, Soybeans, Copra, Palm seeds, Rape seeds, Lin seeds, Flax seeds, and many more. Some seeds vary from the others and needs special machines to crack, cut, and clean them. Oil Seed Processing Machines of all sorts are available to meet all these requirements.

Anand Oil Mill Plants are the manufacturers of all processes of seed treatment machinery which are categorized as Seed Cleaners, Seed Flakers, Seed Crackers / Breakers, Hullers, Copra Cutters, Decorticators / Separators, Destoners, Hammer Mills / Disintegrators, Boilers, Seed Cookers / Heating Kettles, Seed Elevators, Seed Conveyors, etc. One of the main advantages of using these seed processing machines and equipment is that they save a lot of labour, which otherwise is lost just by doing the same things manually. This in turn helps in saving precious time as well as increases the output of oil production. By the use of seed processing equipment, the oil that is extracted is also of the highest and purest quality as these machinery provide more accurate and precise results.

OIL EXTRACTION SECTION

Anand Oil Mill Plants manufactures proper setup for oil extraction process. Care has to be taken while expelling the oil to ensure maximum oil recovery with minimum power consumption; the cake should not be burnt, proteins, vitamins and nutrients should not be damaged, colour fixation of oil should not take place, minimum heat should be generated while expelling process; moisture should not find its way with extracted oils, filtration should be in such a manner that no cake particles remain in contact with oil, thus FFA of oil should not be increased.

First Method:
Only pre-pressing is done in which case seeds are lightly pressed and leaves about 14% to 18% oil in the pressed cake. This method results in higher capacity; lower power consumption, lower wear & tear / maintenance. It is recommended when the buyer has his own solvent extraction line, so that balance oil is recovered during solvent extraction process.

Second Method:
When pressed cake is to be sold in the market, it is desirable to recover the maximum oil by Mechanical Extraction. Hence double or more pressing system is recommended. Here either in the same screw press - two stage pressing is carried out or prepressed cake from first stage screw press in sent for second pressing to other screw press. The oil left over after double pressing varies from 5% to 9% depending on the oil seed and extent of pressing.

Special Preparatory Required Equipments:
Any oil-bearing seeds can be processed in an oil mill (mechanical extraction system), special preparatory equipment are recommended prior to expelling. For Cottonseed, Sunflower seed, Groundnut seed- Decorticators are recommended. For Copra and Palm kernel- Cutters & Hammer Mills are required as preparatory equipment.

Anand Oil Mill Plants offers Oil Milling Plants right from 1Tons to 1000 Tons/ 24hrs capacity and are suitable for processing any kind of oilseeds.

OIL PROCESSING SECTION

Anand Oil Mill Plants are known manufactures and exporters of Oil Processing Machinery in India. We manufacture Oil Filter Press, Neutralizer Refinery, Oil Refinery, Pressure Leaf Filter, Polish Filter and Vibro / Gyratory Screen etc. All of our Oil processing machines are known for best quality and long life of working.

MATERIAL HANDLING SECTION

Anand Oil Mill Plants are the manufactures and exporters of material handling machines in India. Our material handling machinery products range includes Bucket Elevators and Conveyors. All of our material handling equipments are known for best quality and long life of working.

SPARES

Technical Details : ANAND equipment is designed & manufactured to deliver utmost performance and efficiency. Each part has precise tolerance and specifications. Over a precise time period of continious operation, the parts get worn out resulting into loss in production and residuals. For our equipments buy only genuine spares from the company, as for imitation parts made by those companies that do not know how those parts work and what there tolerances are. We manufacture the replacement parts tailored to fit your productivity needs. Genuine spares will protect your original equipments and ensure peak performance and increased through output.